Finding the suspension point of the fall arrester is crucial

Identifying the suspension point of the anti fall device is the most basic guarantee for the safety of high-altitude operations. So how should we hang it during use?

1. The first step in building operations is to ensure the stability of the suspension points. Do not hang the fall arrest device on some loose and worn protective barriers between the buildings. If you accidentally fall, the protective barrier may fall together with others, and the quality of the fall arrest device is of no use.

2. It has always been emphasized that the hook should be hung directly above oneself during use. Hanging under oneself, once accidentally falling, the anti fall device cannot feel any gravity effect in the first place. Under the action of gravity acceleration, both the person and the anti fall device will withstand higher impact force, which is very dangerous.

3. The angle of the suspension of the anti fall device should be as perpendicular to itself as possible, and the angle should be kept within 30 °. If the angle is too large, when the fall arrester self-locking occurs, people will inevitably swing left and right due to the angle being too large, which is likely to cause the staff to collide with other objects and be injured.

The above is the suspension issue of the anti fall device. We hope that everyone must find the suspension points well during use and strive to eliminate all safety hazards.