How Often is the Safety Fall Arrester Tested

Every Time You Use the Safety Belt, You Must Make a Visual Inspection. During Use, You Must Also Pay Attention to the Inspection, and Test It Once in Half to One Year.

It is Required That the Main Components Are Not Damaged. if Any Damage or Deterioration is Found, It Shall Be Reported in Time and the Use Shall Be Stopped to Ensure the Operation Safety.

The Speed Difference Automatic Controller is Fixed and Suspended Above the Operation Point. the Rope in the Automatic Controller is Connected with the Upper Half Ring of the Safety Belt. the Rope Can Be Pulled out Arbitrarily and Operated at a Certain Position. After the Work is Completed, when the Person Moves Upward, the Rope Will Automatically Retract into the Automatic Controller. the Automatic Controller is Affected by the Speed when Falling

Perform Brake Control. During the Test, the Length of the Pull-out Rope is 0.8m. It is Required That the Sliding Distance of the Simulated Human Body when Falling Shall Not Exceed 1.2m.